• Low to medium output LED flexible tape
  • High or low LED density
  • 690 to 2035 lumens per metre
  • 5.2 to 15W per metre
  • Reel lengths from 4.2m to 14m.
    • Please Note: Lumen output varies depending on the reel length, for continuity use the same reel length throughout.
  • 2700, 3000 and 4000K white LEDs
  • 3 McAdam SDCM
  • Ra >82
  • 50,000 hours life to L80B10


  • IP00 rated
  • 8mm wide, 24V DC tape
  • Dimmable white LEDs
  • Suitable for ambient operating temperatures from -25ºC to 50°C
  • Can be cut to desired length at 70mm intervals
  • Supplied with pre-soldered 2 core 2m cable at one end for connection to driver
  • Optional quick-fit start of row connector with 2 core 0.5m cable for connection of cut tape to driver (supplied separately)
  • Range of drivers to suit tape length and wattage
  • Range of optional mounting and diffuser accessories
  • Self-adhesive backing to aid quick installation
  • Maximum length of row is length of tape reel
  • Can be wired in parallel to extend length of row
  • High density version:
    • LED spacing at 12mm pitch, 6 LEDs per 70mm
    • Suitable for direct view applications in combination with opal diffuser
  • Low density version:
    • LED spacing at 23mm pitch, 3 LEDs per 70mm
    • Suitable for cove and accent lighting where not directly visible

Starline Multi-Flex High Density HD

Starline Multi-Flex HD Code Lumens per reel Watts per reel LL/CW
5.1W/m, 690 lm/m, 2700K, 14m SFHD127K 9660 72 134
8.6W/m, 1106 lm/m, 2700K, 7m SFHD227K 7442 60 129
15.4W/m, 1906 lm/m 2700K, 4.2m SFHD327K 8005 65 124
5.1W/m, 700 lm/m, 3000K, 14m SFHD130K 9828 72 137
8.6W/m, 1124 lm/m, 3000K, 7m SFHD230K 7868 60 131
15.4W/m, 1938 lm/m, 3000K, 4.2m SFHD330K 8140 65 126
5.1W/m, 737 lm/m, 4000K, 14m SFHD140K 10318 72 143
8.6W/m, 1180 lm/m, 4000K, 7m SFHD240K 8260 60 138
15.4W/m, 2035 lm/m, 4000K, 4.2m SFHD340K 8547 65 132

Starline Multi-Flex Low Density LD

Starline Multi-Flex LD Code Lumens per reel Watts per reel LL/CW
5.6W/m, 542 lm/m, 2700K, 14m SFLD127K 7588 78 97
8.6W/m, 1084 lm/m, 2700K, 7m SFLD227K 7588 60 126
15.4W/m, 1616 lm/m, 2700K, 4.2m SFLD327K 6787 65 105
5.6W/m, 542 lm/m, 3000K, 14m SFLD130K 7588 78 97
8.6W/m, 1106 lm/m, 3000K, 7m SFLD230K 7742 60 129
15.4W/m, 1684 lm/m, 3000K, 4.2m SFLD330K 7073 65 109
5.6W/m, 575 lm/m, 4000K, 14m SFLD140K 8050 78 103
8.6W/m, 1160 lm/m, 4000K, 7m SFLD240K 8120 60 135
15.4W/m, 1811 lm/m, 4000K, 4.2m SFLD340K 7606 65 117

Accessories - Drivers

IP20 Driver Code
Fixed output 20W CNSLD20
Fixed output 75W CNSLD75
Fixed output 180W CNSLD180
Fixed output 250W CNSLD250
Dali dimming 80W CSFDY80
Dali dimming 150W CSFDY150

Note: Driver CSFDY80 may require up to 4 DALI addresses


Option Order Code

* Base Profile requires Mounting Profile.

Maximum number of LED reels per driver

Driver type Code 14m, 78W 7m, 60W 4.2m, 65W
Fixed output 20W CNSLD20 1 (max 2m) 1 (max 2m) 1 (max 1m)
Fixed output 75W CNSLD75 1 (max 11m) 1 1
Fixed output 180W CNSLD180 2 2 2
Fixed output 250W CNSLD250 2 3 3
Dali dimming 80W CSFDY80 1 (max 12m) 1 1
Dali dimming 150W CSFDY150 1 2 2

Note: Multiple reels should be wired in parallel, not in series

Dimensions Diagram 1
650 nominal lumens per m 14000 8 1.5 0.24
1100 nominal lumens per m 7000 8 1.5 0.12
1800 nominal lumens per m 4200 8 1.5 0.07

Photometic Performance

Photometic Performance Diagram - 4000K LED, 2035 lumen, 15.5W
4000K LED, 2035 lumen, 15.5W
LOR = 100%

LED Performance

Colour Temp RA (CRI) Colour consistency
2700 – 4000K > 82 MacAdam 3 SDCM

Flexible linear LED tape with self-adhesive backing for quick installation. Suitable for cutting to desired length on site at 70mm intervals. 5W to 15W nominal per metre with 2700, 3000 or 4000K LEDs. A range of optional accessories to suit flexible LED tape – as Whitecroft Lighting STARLINE MULTI-FLEX

Product Downloads

Select all
  • PDF Starline Multi-Flex Datasheet
  • PDF Installation leaflet

At Whitecroft, we have developed the Whitecroft Lighting Academy, a structured learning programme that will allow us to develop our future leaders, and ensure all of our staff have access to the best professional development opportunities available in our industry.

View More

At Whitecroft, our BIM engineers are not only adept at using Autodesk Revit; they are also fully trained lighting designers. We believe this is essential. When you use our teams on your project, you can rest assured the whole lighting solution is being designed, assessed and managed by people who know the technology inside out and have a full understanding of your requirements.

- We can populate your BIM model with a full lighting design.

- All our BIM families are created in-house, so if bespoke models are required, we can deliver them.

- We use Relux to create design validation data that confirms your project’s compliance and supports your BIM model.

- Once the model is complete, we work with you to interrogate every element including quantity schedules, costs, energy validation, COBie data and delivery schedules.

View More

Whitecroft have become successful in the lighting market, with focus on various sector specialisms. We now have extended our skills by offering a fully managed service which supplies much more than just the luminaires.

Project Management skills have been developed to save time on a project by planning it out and considering all relevant factors which may affect its outcome.

From design to specification, through to product selection, commissioning and after-sales support, we can help our customers meet the cost challenges of the commercial environment.

Our Project Management services encourage a smooth transition throughout your lighting procurement, manufacture, delivery and installation, by providing advice on the best techniques to employ.


Whitecroft Lighting continuously strives to offer customers the best service in the industry. This covers all aspects of our service from lighting design and quotations, to ensuring on-time deliveries and providing dedicated project management.

Whitecroft Lighting operates in a sustainable way by creating lighting solutions best adapted to customer requirements, with the least possible impact on the environment including consumption of natural resources. Whitecroft Lighting contributes to and takes responsibility for the furtherment of sustainability, which it also requires of all suppliers in it’s chain.

Through our environmental management system we are continually reducing our use of natural resources, whilst optimising recycled materials, avoiding waste generation and increasing recycling. As a responsible manufacturer we carry our company values and policies into our supply chain so that our customers can have confidence in the fact that all our lighting solutions are manufactured using only environmentally safe materials and processes.