Overview


  • State of the art recessed LED luminaire for healthcare application, specifically in operating theatres
  • During surgery, lighting must service a number of different needs;
    • The room; room illumination to ensure complete visibility.
    • The patient; high quality colour rendering to ensure a clear and detailed view of the patient’s biology, e.g. the colouration and appearance of skin, blood and organs etc.
    • The screen; green lighting to enhance viewing of vital display screens and to eliminate glare traditionally associated with white light sources
  • DTFN Elite LED Theatre has been specially designed to meet these needs, whilst also ensuring energy efficiency and a high IP rating for cleaning and infection control

Optics


  • Luminaire consists of:
    • White ra90 LEDs emitting 11,500 lumens (134W)
    • Green LEDs emitting 1400 lumens (65W)
  • Two TP(a) rated optic options:
    • Prismatic acrylic above 4mm toughened glass
    • Single sheet 3mm prismatic fireguard material
  • Emergency Output (BLF):
    • All variants - 280 Lumens
  • White Ra>90 LEDS with 4000K ‘cool’ white colour temperature
  • Green LEDs at wavelength of 505nm
  • Separate switching of white and green LEDs
  • DALI as standard

Note – a glass front face resists all cleaning chemicals and is best for a sterile environment. Other TP(a) materials are selected for best chemical resistance. If advice is needed contact the Whitecroft Technical Desk.

Body


  • 1200 x 600mm nominal luminaire size
  • Front access only
  • Welded steel body finished white
  • RAL Colour: White RAL9016.
  • Suitable for cut and prepared aperture ceilings and sandwich panels with capped aperture reinforcements up to a depth of 91mm front and 108mm back access with standard brackets or 155mm front and 172mm back access with special deep ceiling bracket
  • Dual IP rated – to a BSI tested and certified construction as protecting the room to IP65 from void contamination with the front frame in place and IP54 with the frame removed
  • Extruded aluminium outer frame (gasketed to ceiling) removable inner frame integrate in line but at an angle to eliminate a vertical gap. Additional mastic sealant between outer frame and ceiling does not impede lamp access. Concealed front frame fixings and white full gloss frames
  • The diffuser clamping system is highly secure and will accept glass. The inner frame design facilitates diffuser replacement
  • Solid aluminium side arm jacking brackets adjusted from within the sealed body (from the room above for back access versions)

Optics

Optics DALI 3hr Emergency LL/CW
Prismatic acrylic above 4mm toughened glass D9NGAGY14K D9NGAGY14KEM 82
Prismatic TP(a) single sheet D9NGKY14K D9NGKY14KEM 82

Note: This luminaire has 2 drivers and requires 2 DALI addresses

Accessories

1200 x 600mm deep ceiling bracket 150CBKT1200

Options

COMEPS* Add suffix /EP i.e D9NGAGY14K/EP
Dimensions Diagram 1
VERSION L W H KG KG(EM)
Acrylic above glass 1325 603 124 28.5 29.5
Single Sheet 1325 603 124 19.5 20.5

Photometic Performance

Photometic Performance Diagram - 4000K 134W LED, 11,000 Lumen
4000K 134W LED, 11,000 Lumen
LOR = 100.0%
SHR MAX = 1.46
Photometic Performance Diagram - Green LED, 65W, 1400 Lumen
Green LED, 65W, 1400 Lumen
LOR = 100.0%
SHR MAX = 1.46

Performance Guide

Performance Guide Diagram 1
  • Lamps: 4000K LED
  • Illuminance: 1150 lux
  • Spacing: 3.0m x 3.0m

  • Maintenance: 0.8
  • Reflectance: 70/50/20
  • Ceiling Height: 2.7m
  • Working plane: 0.8m

LED Performance

Colour Temp RA (CRI) Life expectancy Colour consistency
4000K >90 L80(50,000hrs) MacAdam 3 SDCM
Green L70(50,000hrs) MacAdam 3 SDCM

Recessed non-modular LED luminaire for prepared aperture ceilings to a BSI tested and certified construction as IP65 frame on IP54 frame off with twin in line extruded aluminium frames with angled integration and concealed front frame fixings. Suspension via robust aluminium cam brackets adjusted from outside the luminaire. White ra90 and green separately switched LEDs specifically for Healthcare environments – as Whitecroft Lighting DTFN ELITE LED THEATRE.

Product Downloads

Select all
  • PDF Installation Leaflet
  • PDF Ceiling Compatibility
  • PDF Maintenance Factors
  • ZIP LDT
  • ZIP Revit
  • ZIP Relux
  • ZIP Dialux
  • PDF DTFN Elite LED Theatre Datasheet
  • PDF Thermoplastic Lighting Diffusers

At Whitecroft, we have developed the Whitecroft Lighting Academy, a structured learning programme that will allow us to develop our future leaders, and ensure all of our staff have access to the best professional development opportunities available in our industry.

View More

At Whitecroft, our BIM engineers are not only adept at using Autodesk Revit; they are also fully trained lighting designers. We believe this is essential. When you use our teams on your project, you can rest assured the whole lighting solution is being designed, assessed and managed by people who know the technology inside out and have a full understanding of your requirements.

- We can populate your BIM model with a full lighting design.

- All our BIM families are created in-house, so if bespoke models are required, we can deliver them.

- We use Relux to create design validation data that confirms your project’s compliance and supports your BIM model.

- Once the model is complete, we work with you to interrogate every element including quantity schedules, costs, energy validation, COBie data and delivery schedules.

View More

Whitecroft have become successful in the lighting market, with focus on various sector specialisms. We now have extended our skills by offering a fully managed service which supplies much more than just the luminaires.

Project Management skills have been developed to save time on a project by planning it out and considering all relevant factors which may affect its outcome.

From design to specification, through to product selection, commissioning and after-sales support, we can help our customers meet the cost challenges of the commercial environment.

Our Project Management services encourage a smooth transition throughout your lighting procurement, manufacture, delivery and installation, by providing advice on the best techniques to employ.

 

Whitecroft Lighting continuously strives to offer customers the best service in the industry. This covers all aspects of our service from lighting design and quotations, to ensuring on-time deliveries and providing dedicated project management.

Whitecroft Lighting operates in a sustainable way by creating lighting solutions best adapted to customer requirements, with the least possible impact on the environment including consumption of natural resources. Whitecroft Lighting contributes to and takes responsibility for the furtherment of sustainability, which it also requires of all suppliers in it’s chain.


Through our environmental management system we are continually reducing our use of natural resources, whilst optimising recycled materials, avoiding waste generation and increasing recycling. As a responsible manufacturer we carry our company values and policies into our supply chain so that our customers can have confidence in the fact that all our lighting solutions are manufactured using only environmentally safe materials and processes.