Command Professional LON / DALI Controller

Command Professional LON / DALI Controller

Command Professional LON / DALI Controller

Command Professional LON / DALI Controller

Features

  • Fully networked solution
  • Configured to control up to 4 x 64 addresses
  • DALI bus short circuit protection
  • LED indicator for power, network, DALI
  • 250 mA drive per DALI bus
  • Fail-safe mode to occupied state
  • Override buttons
    • Broadcast off
    • Broadcast on
    • Broadcast dim

Specification

  • Mains supply
    • 100 - 230VAc; 47-63 Hz
  • Networking
    • LonWorks™ network TP/FT-10 (Capacitor Decoupled)
  • Connections
    • Mains input
    • L, E, N Screw terminal connections
    • DALI Bus
    • D1, D2 screw terminal connections for each DALI channel bus
  • Output
    • 2 independent DALI bus outputs (Each for 64 DALI addresses)
    • Output isolation: 4 kV
    • Connection: Rising clamp screw terminal
  • Conformity & Standards
    • Generic emission : EN 50081-1
      Generic immunity: EN 50082-1
      RFI : EN 55014
      LonMark™ compliant
      DALI compliant
  • Operating Temperature
    • 0ºc to +40ºc
  • Operating Humidity
    • 10% to 90% non condensing
  • Safety
    • EN 60950
    • Isolation: 4kV between mains & outputs
  • Installation
    • At an accessible height but no higher than 1.5 metres

 

CONTROLLER (1 X 64) COMPF1CRL
CONTROLLER (2 X 64) COMPF2CRL
CONTROLLER (3 X 64) COMPF3CRL
CONTROLLER (4 X 64) COMPF4CRL

Warning: Division by zero in /var/www/vhosts/whitecroftc4w.com/whitecroftlighting.com/template_inc/data-blocks/product-page-product-specs.php on line 406

LON/DALI controller, a fully networked solution configured to control up to 4 x 64 addresses - as Whitecroft Lighting COMMAND PROFESSIONAL LON / DALI CONTROLLER.

 

Product Downloads

Single download

Add to ZIP