PIR surface Mounted Detector

PIR surface Mounted Detector

PIR surface Mounted Detector

PIR surface Mounted Detector


  • Surface mounting
  • Photocell and passive infra-red technology (PIR)
  • Dimming and scene setting
  • Occupancy and daylight detection
  • 360° field of view
  • DALI addressing
  • Occupies a single DALI address
  • Coverage: 2.5 x height of ceiling (maximum 7 metres)
  • ABS housing
  • Fits a standard BESA box *


* BESA / Surface mounting box supplied by others


  • Power Consumption
    • 4mA nominal consumption at 15V DALI bus voltage
  • Operating Temperature
    • 0°C to +56°C
  • Operating Humidity
    • 10% - 90% non-condensing
  • Installation
    • For use with ceiling tiles of 1mm to 20mm thickness
    • Not to be installed within 1 metre of forced air heating, ventilation or other sources of heat or drafts
    • Not to be installed in direct sunlight or in direct line of artificial light
  • Conformity & Standards
    • EMC immunity EN 50082-1
    • EMC emissions EN 50081-1
    • DALI & NEMA compliant
    • IEC Standard 62386-102
    • Supports DALI 2 & 3 byte protocol
PIR Sensor (Surface Mounting) COMPFSURPIR
VERSION H Ø Cut Aperture KG
COMPFSURPIR 21.5mm 65.0mm 40.0mm 0.2

Surface mounted DALI addressing PIR detector with photocell for occupancy, dimming and daylight detection - as Whitecroft Lighting COMMAND PROFESSIONAL COMPFSURPIR.

Product Downloads

Single download

Add to ZIP

Back to top